Neighbourhood circle

On the holiday, whether it is travel or family gathering, digital camcorder will be used very frequently. It is essential for us to know how to care and maintain the machine. This issue became the major problem for users. Most of them are very concerned about it. We should know the way of maintenance. Operating instructions usually have a brief description. But the knowledge for a user to completely control of the maintenance is not enough.

The first point that you should remember is to put the camera lens facing the intense sun or other strong light source. Light will be destroyed because of the camera tube. There are great moments in the sunrise and sunset. It will allow the sun for too long shoot. Do not let direct sunlight fired into the viewfinder, because the light will damage the viewfinder screen. When you are using lighting, camera and lighting should be sufficient distance to prevent direct exposure. There will be strong light on the digital camcorder. You need to stop using the camcorder. You should immediately turn off the power into the backpack. you can avoid exposure to light.

Digital camcorders use CCD charge-coupled device. The heat capacity is limited. We cannot use a digital camera directly at the sun. It will take a very strong light. The image will be a serious vertical smear. The film quality is affected. We should try to shorten the time taken to avoid the time. Digital camera is exposed to strong light for a long time. The heat will cause the chassis deformation. So the use and preservation should be careful. You cannot put the machine under prolonged exposure to bright light. You cannot put the machine near heating pipes or heating equipment.

If the digital camcorder has to be dried in the sun, you can use a colored towel or sand. It can avoid a foil to block the tool mounted to light. It should be taken in low temperature cold measures. The camera can be hidden in the pocket. The method allows the camera to maintain the appropriate temperature. But you can also carry a spare battery, because the camera at low temperatures may stop working. It seems to give the car in cold weather as warm.

When the machine is taken from a cold place into a warmer room, the workplace humidity exceeds a certain value. The drum surface will be sticky because of condensation. You can start work if the tape will be attached to the magnetic the drum. It is easy to damage the heads and tape. And it is likely to cause malfunction. Therefore you need to use newspaper or plastic wrap the camera until the temperature of the digital camcorder rises to the room temperature before using.